UR      :  CQCQCQ

RPT 1 :  MB6CC  C  ( MB6CC space space C )

RPT 2 :  MB6CC  G  ( MB6CC space space G )

MY     :  A1ABC   ( Your call sign )

 

MB6CC Open G2 DSTAR Gateway

Home

Who's Connected ?

Radio Programming

Contact Us

Multi Trust

 

 

 

 

 

 

MB6CC Radio Settings

 

 

Set radio Frequency to 144.8125 Mhz  & 0 Mhz -rpt Shift

 

                                                        

 

 

 

                            

 

 

 

 

 

 

 

 

 

NOTE THAT THE C & IN THE ABOVE MUST ALWAYS
BE IN THE 8
th LETTER POSITION.
ie.
 
MB6CC (space) (space) C

 

 


 

 

UR is used as a command to link and unlink the gateway to either  REF (Dplus) reflectors

or XRF (MultiTrust) reflectors.

 

Sending CQCQCQ in UR call will return the status of the Gateway via a text acknowledgement.
Please issue this command before using the Gateway so you understand what status it is in before sending new commands.

 

'CQCQCQ**' - Check Status
'*******U' - Disconnect Reflector/Repeater
'*******L' - Connect to Reflector/Repeater

 

Example UR Commands
 

XRF001AL = Connect to XRF001 Reflector on Port A

REF005AL = Connect to REF005 Reflector on Port A
/GB3IN  C = Callsign route to GB3IN module C Repeater (GB3IN users will have to callsign route back to your call to be heard)

GB3IN  CL = Connect to GB3IN module C Repeater (No return callsign routing required)
 

  You must reset UR to CQCQCQ after the link command is sent to work

through the Gateway.


Callsign Routing

 

MB6CC supports callsign routing using ircDDB lookup. (see www.ircddb.net for more info)
 


 

 

NOTE THAT THE C AND U IN THE ABOVE MUST ALWAYS

 

BE IN THE 8th LETTER POSITION.